FLUKE 705 CALIBRATION and FLUKE 705 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 705 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our  used Calibrator page

 
   FLUKE 705   Description / Specification:    
FLUKE 705 Loop Calibrator

The Fluke 705 Loop Calibrator is an efficient tool for calibration, repair and maintenance of current loops. It features mA sourcing, simulation and measurement readout for quick, easy interpretation of readings, with 0.02% accuracy and 0.001 mA resolution and simultaneous mA and % of span display. This includes a "Span Check" for fast confirmation of zero and span. It also has a selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests, and a 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
Specifications.

Current Measurement.
Range: 0 to 24 mA.
Resolution: 0.001 mA.
Accuracy: 0.02% Rdg + 2 LSD.

Current Sourcing
Range: 0 to 20 mA or 4 to 20 mA.
Accuracy: 0.025% Rdg + 2 LSD.
Drive Capability: 1000 Ω @ 24 mA.

Current Simulation
Range: 0 to 20 mA or 4 to 20 mA.
Accuracy: 0.025% Rdg + 2 LSD.
Ext. loop voltage requirement: 12-30 V.
Loop Power: While measuring mA, 24 V.

Voltage measurement
Range: 0 to 28 V DC.
Resolution: 1 mV.
Accuracy: 0.025% Rdg + 2 LSD.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your FLUKE 705 CALIBRATION and/or FLUKE 705 Loop Calibrator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: