FLUKE 787 REPAIR and FLUKE 787 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the FLUKE 787. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 787 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our
 used Calibrator page

 
   FLUKE 787   Description / Specification:    
FLUKE 787 ProcessMeter

The Fluke 787 ProcessMeter is a handheld, battery-operated tool for measuring electrical parameters and supplying steady or ramping current to test process instruments. It has all the features of a digital multimeter, plus current output capability. Specifications. DC Voltage Ranges: 400.0 mV, 4.000V, 40.00V, 400.0V, 1000V. DC Voltage Maximum Resolution: 0.1 mV. DC Voltage Accuracy: ± (0.1% reading + 1). AC Voltage Ranges: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V. AC Voltage Maximum Resolution: 0.1 mV. AC Voltage Accuracy (50 Hz to 60 Hz): ± (0.7% reading + 2) @ 4.000 V, 40.00 V, 400.0 V, 1000 V. DC Current Ranges: 30.00 mA, 1.000 A. DC Current Maximum Resolution: 0.001 mA. DC Current Accuracy: ±(0.2% + 2) @ 1.000 A. AC Current Range: 1.000 A. AC Current Maximum Resolution: 0.001 mA. AC Current Accuracy: ±(1% + 2). Resistance Ranges: 400.0, 4.000 k, 40.00 k, 400.0 k, 4.000 M, 40.00 M ohm. Resistance Maximum Resolution: 0.1 ohm. Resistance Accuracy: ± (0.2% reading + 1 digits) @ 4.000 k, 40.00 k, 400.0 k ohm. Frequency Counter: 199.99 Hz, 1999.9 Hz, 19.999 kHz. Frequency Counter Maximum Resolution: 0.01 Hz. Frequency Counter Accuracy: ± (0.005% reading + 1 digits). Diode test indication: display voltage drop, 0.2 mA, nominal test current at 0.6V, 2.4V full scale, accuracy ±(2% + 1 count). Continuity test indication: continuous audible tone for test resistance <100 ohms. DC Current Output Source mode Span: 0 mA or 4 mA to 20 mA, with overrange to 24 mA, Accuracy; 0.05% of span. DC Current Simulate Mode Span: 0 mA or 4 mA to 20 mA, with overrange to 24 mA, Accuracy; 0.05% of span.



 

Standard Calibration $650.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 787. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your FLUKE 787 REPAIR and/or FLUKE 787 ProcessMeter CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: