FLUKE 787 REPAIR and FLUKE 787 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the FLUKE 787. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 787 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our
 used Calibrator page

 
   FLUKE 787   Description / Specification:    
FLUKE 787 ProcessMeter

The Fluke 787 ProcessMeter is a handheld, battery-operated tool for measuring electrical parameters and supplying steady or ramping current to test process instruments. It has all the features of a digital multimeter, plus current output capability. Specifications. DC Voltage Ranges: 400.0 mV, 4.000V, 40.00V, 400.0V, 1000V. DC Voltage Maximum Resolution: 0.1 mV. DC Voltage Accuracy: ± (0.1% reading + 1). AC Voltage Ranges: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V. AC Voltage Maximum Resolution: 0.1 mV. AC Voltage Accuracy (50 Hz to 60 Hz): ± (0.7% reading + 2) @ 4.000 V, 40.00 V, 400.0 V, 1000 V. DC Current Ranges: 30.00 mA, 1.000 A. DC Current Maximum Resolution: 0.001 mA. DC Current Accuracy: ±(0.2% + 2) @ 1.000 A. AC Current Range: 1.000 A. AC Current Maximum Resolution: 0.001 mA. AC Current Accuracy: ±(1% + 2). Resistance Ranges: 400.0, 4.000 k, 40.00 k, 400.0 k, 4.000 M, 40.00 M ohm. Resistance Maximum Resolution: 0.1 ohm. Resistance Accuracy: ± (0.2% reading + 1 digits) @ 4.000 k, 40.00 k, 400.0 k ohm. Frequency Counter: 199.99 Hz, 1999.9 Hz, 19.999 kHz. Frequency Counter Maximum Resolution: 0.01 Hz. Frequency Counter Accuracy: ± (0.005% reading + 1 digits). Diode test indication: display voltage drop, 0.2 mA, nominal test current at 0.6V, 2.4V full scale, accuracy ±(2% + 1 count). Continuity test indication: continuous audible tone for test resistance <100 ohms. DC Current Output Source mode Span: 0 mA or 4 mA to 20 mA, with overrange to 24 mA, Accuracy; 0.05% of span. DC Current Simulate Mode Span: 0 mA or 4 mA to 20 mA, with overrange to 24 mA, Accuracy; 0.05% of span.



 

Standard Calibration $565.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 787. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your FLUKE 787 REPAIR and/or FLUKE 787 ProcessMeter CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: