FLUKE 902 CALIBRATION and FLUKE 902 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 902 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE 902   Description / Specification:    
FLUKE 902 600 Amp HVAC Clamp Meter

The Fluke 902 HVAC Clamp Meter was designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements. The small body and jaws fit perfectly in your hand and into tight places, and the meter controls are positioned so current measurements can be done with one hand. It features a large, backlit display and an auto shut-off that maximizes battery life so the meter works when you need it. It is a True RMS meter with a CAT III 600 V safety rating.
Specifications.

Voltage DC.
Range: 0 - 600.0 V.
Accuracy: 1% ±5 counts.

Voltage AC (True RMS).
Range: 0 - 600.0 V.
Accuracy: 1% ±5 counts (50/60 Hz).

Current AC (True RMS).
Range: 0 - 600.0 A.
Accuracy: 2.0% ±5 counts (50/60 Hz).

Current DC.
Range: 0 - 200.0 µA.
Accuracy: 1.0% ±5 counts.

Resistance.
Range: 0 - 9999 Ω.
Accuracy: 1.5% ±5 counts.
Continuity: ≤ 30 Ω.

Temperature (Type K Thermocouple).
Range: -10°C to 400°C (-14°F to 752°F).
Accuracy: ±1.0% + 0.8°C (±1.0% + 1.5°F) typical.
Range: -40°C to -10°C (-40°F to -14°F).
Accuracy: ±5.0% + 1.5°C (±5.0% + 3.3°F) typical.

Capacitance.
Range: 1 - 1000 µF.
Accuracy: 1.9% ±2 counts.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE 902 CALIBRATION and/or FLUKE 902 600 Amp HVAC Clamp Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: