FLUKE 8010A CALIBRATION and FLUKE 8010A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 8010A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 8010A   Description / Specification:    
FLUKE 8010A 3 1/2 Digit Digital Multimeter

The Fluke 8010A is a 3 1/2 digit portable/bench DMM, that offers exceptional performance and features. Measurement functions include: dc volts, true-rms ac volts, dc amps, true-rms ac amps, ohms, conductance, and diode test. The 8010A features a 10A current range. A rechargeable-battery version is available as Model 8010A-01. The 8010A operates on ac line power only. A Fluke-manufactured true-rms converter assures accurate measurements of non-sinusoidal voltage or current waveforms such as squarewaves (crest factor of 1 to 1). This custom hybrid provides low noise and a wide bandwidth. Accuracy is specified to 50 kHz, but the typical -3 dB bandwidth is 200 kHz. When measuring resistance or conductance, up to 500 volts may be applied with no instrument damage. Voltage inputs can handle 1000V dc or peak ac and transients up to 6 kV. DC Voltage Ranges: ±200 mV, ±2V, ±20V, ±200V, ±1000V. DC Voltage Resolution: 100 uV on lowest range 1V on 1000V range. DC Voltage Accuracy: (±0.1 % of reading + 1 digit) on all ranges. AC Voltage Ranges: 200 mV, 2V, 20V, 200V, 750V. AC Voltage Resolution: 100 uV on lowest range 1V on 750V range. Useful Frequency Range: Typically ±3 dB at 200 kHz. Crest Factor: Waveforms with peak/rms ratio of 1:1 to 3:1. Resistance Ranges: 200, 2k, 20k, 200k, 2M, 20M ohms. Resistance Resolution: 0.1 ohm on lowest range 10 kohm on 20 Mohm range. Diode Test: The three diode test ranges are marked with a diode symbol and have enough open circuit voltage to turn on silicon junctions allowing a diode test. Open Circuit Voltage: < 3.5V on all ranges. Conductance Ranges: 2 mS, 20 uS, 200 nS. Conductance Resolution: 1 uS on lowest range 0.1 nS on 200 nS range. DC Current Ranges: 200 uA, 2 mA, 20 mA, 200 mA, 2000 mA, 10 A. DC Current Resolution: 0.1 uA on lowest range 10 mA on 10 A range. AC Current Ranges: 200 uA, 2 mA, 20 mA, 200 mA, 2000 mA, 10 A. Display: 3 1/2 digit (2000 counts), LCD, autozero, autopolarity.



 

Standard Calibration $70.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 8010A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your FLUKE 8010A CALIBRATION and/or FLUKE 8010A 3 1/2 Digit Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: