FLUKE 80I-110S CALIBRATION and FLUKE 80I-110S REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 80I-110S Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE 80I-110S   Description / Specification:    
FLUKE 80I-110S 100 Amp AC/DC Clamp

The Fluke 80I-110s is an AC/DC current clamp compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device via BNC input connectors. It has IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II Safety Ratings, and a working Voltage of 600V.
Specifications.

Nominal current range: 10 A, AC/DC ; 100 A, AC/DC.
Continuous current range: 0.1 A - 10 A AC/DC ; 1 A - 100 A AC/DC.
Maximum non-destructive current: 140 A - 2 kHz.
Lowest measurable current: 0.1 A.
Basic accuracy.
  50 mA to 10 A (100 mV/A setting): ±3% of reading +50 mA.
  50 mA to 40 A (10 mV/A setting): ±4% of reading +50 mA.
  40 A to 80 A: ±12% of reading +50 mA.
  80 to 100 A: ±15% of reading.
Usable frequency: DC - 100 kHz.
Output level(s): 10 A range: 100 mV/A.
100 A range: 10 mV/A.
Zero error adjustment: Yes.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.


Please contact us for your FLUKE 80I-110S CALIBRATION and/or FLUKE 80I-110S 100 Amp AC/DC Clamp REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: