|
|
General description of the
used ANRITSU MP1763B
for sale.
0.05 to 12.5 GHz Pulse Pattern Generator. External clock; Input level: 0.4 to 2.5 Vp-p. Input waveform: Square wave with rise/fall time of less than 1 ns, duty factor 50% (0.05 to 0.5 GHz); Sinusoidal wave or square wave with rise/fall time of less than 1 ns, duty factor 50% (>0.5 GHz). Input connector: APC-3.5. Internal clock; Frequency setting resolution: 1 kHz, 1 MHz. Stability: ±1 ppm. SSB phase noise (at 10kHz offset, 1 Hz bandwidth): -85 dBc/Hz (0.05 to 4 GHz), -80 dBc/Hz (4 to 8 GHz), -75 dBc/Hz (8 to 10 GHz), - 70 dBc/Hz (10 to 12.5 GHz). Reference signal: 10 MHz (internal/external, selectable). Pattern; Pseudorandom binary sequence pattern (PRBS): Pattern: 2^n-1 (n: 7, 9, 11 , 15, 20, 23, 31), Mark ratio: 1/2, 1/4, 1/8, 0/8 (172, 3/4, 7/8, 8/8 are possible with logic inversion). Data pattern: Data length: 2 to 8388608 bits; Pattern reset/preset: ALL/PAGE selectable. Alternate pattern: A/B pattern data length: 128 to 4194304 (128 bit steps); Loop time: A, B pattern (1 to 127, 1 steps). Data output; Output waveform: NRZ. Amplitude: 0.25 to 2 Vp-p, 2 mV steps (setting error: ±15% or ±100 mV, whichever is greater). Offset voltage: Voltage: -2 to ±2 V (VOH), 1 mV steps (setting error: ±15% of offset voltage, ±100 mV or ±15% of amplitude whichever is the greatest. Rise/fall time: Typical 30 ps (10% to 90% of amplitude). Pattern jitter: <=20 psp-p (typical 10 psp-p). Waveform distortion: <=15% or <=150 mV whichever is greater
|