Torque Driver Calibration Service


Our prices for Torque Driver calibration service range from:
$60.00 to $85.00
A torque screwdriver is a tool used to precisely apply a specific torque to a fastener such as a nut or bolt. A torque screwdriver measures torque as a proxy for bolt tension. A properly torqued fastener will remain tight during all loads and vibration. A fastener that is stretched (preloaded) to it’s designed level of residual stress will resist failure for the given cycle load and the maximum number of fatigue cycles it was designed for. It will also provide maximum resistance to loosening from vibration.
When selecting torque screwdriver it is recommended to select one in the middle 50% of the overall capacity of the tool. This will result in longer tool life, ease of use for the operator. Most torque screwdrivers allow the torque to be set to any value within a range. All have a torque-limiting clutch that disengages once the preset torque has been reached.

At Custom-Cal we know OEM Torque Driver calibration services are generally rigid in their turnaround time and scope of calibration. That is why we take pride in our ability to follow rigid procedures but what differentiates us is our willingness to meet your business goals. We can perform specific portions of the calibration based on your quality requirements enabling us to strike the optimal balance between quality objectives and cost. This is accomplished through the use of our proprietary procedures and integrated processes.

Custom-Cal also offers on-site Torque Driver calibration service and expedited services to meet the needs of our customers. The instruments listed below are a sample of what we calibrate and can possibly repair.

Torque Driver Calibration Services Featured Instruments (Sample of what we calibrate)
 ManufacturerModelInstrument TypeCalibration Type, Price
DetailsMOUNTZTLS 04064.4 - 36 Torque Limiting ScrewdriverStandard Calibration $60.00
DetailsMOUNTZTLS01351.2 - 12 Torque Limiting ScrewdriverStandard Calibration $60.00
DetailsPROTO61067 to 36 in-lb 1/4" Drive Micrometer Adj. Torque Screwdriver 
DetailsSEEKONK PRECISION TOOLSSL-25R0-25 in. lbs. Right Vertical Torque Gauge ScrewdriverStandard Calibration $65.00
DetailsSEEKONK PRECISION TOOLSSL-60-6 in. lbs. Vertical Torque Gauge ScrewdriverStandard Calibration $65.00
DetailsUTICA TOOLTS-10020 to 100 in-oz Torque Limiting Adjustable ScrewdriverStandard Calibration $85.00
DetailsUTICA TOOLTS-306 to 30 in-lb Torque Limiting Adjustable ScrewdriverStandard Calibration $85.00
DetailsUTICA TOOLTS-356 to 36 in-lb Torque Limiting Adjustable ScrewdriverStandard Calibration $85.00
DetailsUTICA TOOLTS-SN-120 to 150 in-oz Torque Limiting Preset ScrewdriverStandard Calibration $85.00
DetailsUTICA TOOLTS-SN-28 to 40 in-lb Torque Limiting Preset ScrewdriverStandard Calibration $85.00
*This is a Web introductory price for one Torque Driver calibration. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.