LECROY LW420A CALIBRATION and LECROY LW420A REPAIR
The LECROY LW420A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the LECROY LW420A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   LECROY LW420A   Description / Specification:    
LECROY LW420A 2-Ch 100 MHz WaveStation Arbitrary Waveform Generator

The LeCroy LW420A WaveStation arbitrary waveform generator makes it easy to create and edit waveforms The LW400 combines complete on board word proccessor like cut, copy and paste, waveform editing with live waveform feature manipulation and waveform generation. Specifications. Standard Function Waveforms - 1 Hz Resolution: Sine, 1 Hz - 100 MHz; Square, 1 Hz - 50 MHz; Triangle, 1 Hz - 25 MHz; Ramp, 1 Hz - 25 MHz; Pulse, (period)20 ns - max. memory DC; Frequency Sweep Linear / Log; Multitone, 1-10 tones, 1 Hz - 100 MHz. Arbitrary Functions Waveform Creation: Interactive Graphical editor on Internal 9" CRT. Waveform Feature Time Resolution: 100 ps. Available memory: 256k/ch. standard, 1 Mpoint optional. Minimum segment length: 64 points. Maximum segment length: Up to available memory (1Mpoint when optional memory installed). Segment length resolution: 1 point. Waveform Output. Output channels: 2. Output Impedance: 50 ohm , ± 5%. DC Accuracy: ±(2% of setting +40 mV) for output > 500 mV peak-peak, ±(2% of setting +15 mV) for output <= 500 mV peak-peak. Maximum output voltage: 10 V p-p into 50 ohm. Output bandwidth: 100 MHz (-3dB) (widest bandwidth). Output bandwidth: 100 MHz (-3dB) (widest bandwidth). Sample clock characteristics (with internal 10 MHz reference); Maximum sample rate: 400 MS/second. Accuracy: ±3 ppm over operating temperature range. Stability: Aging <1 ppm/year. SSB Phase Noise: <-90 dBc/Hz @ 10 KHz offset for a 10 MHz sine wave at output. Resolution: 1 Hz. Trigger Sources. Manual: Front panel pushbutton. External: Front panel BNC connector. GPIB: A trigger command may be issued over the GPIB bus. Options. 09A Digital Output Option.



 

Standard Calibration $520.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the LECROY LW420A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your LECROY LW420A CALIBRATION and/or LECROY LW420A 2-Ch 100 MHz WaveStation Arbitrary Waveform Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: