Keysight (Agilent) 11980A CALIBRATION and Keysight (Agilent) 11980A REPAIR

The Keysight (Agilent) 11980A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 11980A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Fiber Optic Instrumentation?
Shop for Comparable Products on our
 used Fiber Optic Instrumentation page

 
   Keysight (Agilent) 11980A   Description / Specification:    
Keysight (Agilent) 11980A Lightwave Fiber Optic Interferometer

The Agilent 11980A is a Mach-Zehnder interferometer of fixed delay. Used with an Agilent 71400-series lightwave signal analyzer, it allows ,you to measure chirp and frequency modulation (FM) on DFB lasers. Traditional measurements of laser Iinewidth on single-line lasers can also be made. Together, the interferometer, lightwave signal analyzer, and a gateable RF source permit the display of a true power spectrum of single-frequency lasers. This includes the display of intensity modulation linellidth and componenrs of chirp caused by the intensity modulation. Specifications. Optical Insertion Loss, 1300 nm/1550 nm: <8 dB. Wavelength Range: 1250 to 1600nm. Delay Time: 3.5 us, 25 usec with Option 005. Option 005 replaces the standard 0.76 km of delay with 5.2 km, to measure laser linewidth down to 30 kHz. Connector Interface Options. Option 011: Diamond HMS,lQ Connector. Option 012: FC/PC Connector. Option 013: DIN 47256 Connector. Option 014: ST Connector. Option 015: Biconic Connector.



 

Standard Calibration $435.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 11980A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)


Please contact us for your Keysight (Agilent) 11980A CALIBRATION and/or Keysight (Agilent) 11980A Lightwave Fiber Optic Interferometer REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: