Keysight (Agilent) J7230A REPAIR and Keysight (Agilent) J7230A CALIBRATION
The Keysight (Agilent) J7230A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) J7230A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) J7230A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) J7230A   Description / Specification:    
Keysight (Agilent) J7230A OmniBER OTN Communications Performance Analyzer

The Agilent J7230A OmniBER OTN 10 Gb/s analyzer offers BER and overhead testing at all SONET/SDH rates from 52 Mb/s to 10 Gb/s, plus the G.709 optical channel rates of OTU1 (2.66 Gb/s) and OTU2 (10.71 Gb/s). This combination enables the comprehensive testing of next generation optical channel devices and equipment. The independent verification of such devices and equipment against the new standards, provides greater confidence of interoperability with other vendors equipment, and speeds time to market. The units main features are as follows: comprehensive (ITU-T G.709) OTU1 and OTU2 optical channel support including Forward Error Correction (FEC) simulation and analysis, and OTU frame capture; comprehensive contiguous concatenation support including standard STS-3c/AU-4, STS-12c/AU-4-4c, STS-48c/AU-4-16c and arbitrary STS-6c/AU-4-2c, STS-9c/AU-4-3c and STS-24c/AU-4-8c; network realistic mixed mapping support; simultaneous BER and alarm monitoring of all STS/AU channels ("Signal Wizard"); APS service disruption measurements; set-up and monitoring of all SONET/SDH/optical channel overhead bytes; and unframed PRBS capability at all rates. Options. Opt 012 - DSn/PDH framed/unframed testing plus DSn/PDH / VCAT and Ethernet over SONET/SDHelectrical interfaces. Opt 100 - 52-2488 Mb/s test interfaces not required. Opt 104 - 1310 nm optical transmitter. Opt 105 - 1550 nm optical transmitter. Opt 106 - 1310/1550 nm optical. Opt 108 - Optical Interfaces operating at 10 and 10.7 Gb/s, 1550 nm optical transmitter. Opt 111 - Adds OTU-1 at 2.66Gb/s. Opt 112 - PDH/DSn Testing/Electrical Interfaces, OTU2 testing at 10.71Gb/s. Opt 325 - Adds virtual concatenation, Ethernet over SONET/SDH and mixed mappings. Opt 510 - Firmware only option that adds mixed mappings plus STS-6c, -9c, -24c and VC-4-2c, -4-3c, -4-8c. Opt 609 - FC/PC Adapters fitted on all optical interfaces. Opt 610 - SC Adapters fitted on all optical interfaces. Opt 611 - ST Adapters fitted on all optical interfaces.



 

Standard Calibration $810.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) J7230A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your Keysight (Agilent) J7230A REPAIR and/or Keysight (Agilent) J7230A OmniBER OTN Communications Performance Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: