Keysight (Agilent) 86030A CALIBRATION and Keysight (Agilent) 86030A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86030A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our  used Lightwave Measurement System page or new Lightwave Measurement System page

 
   Keysight (Agilent) 86030A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 86030A 50 GHz Lightwave Component Analyzer

The Agilent 86030A Lightwave Component Analyzerr allows the user to measure all the optical and microwave components of a high-speed fiber optics transmission system, The analyzer allows electrical-electrical, electrical-optical. optical-electrical, and optical to optical measurements to be made in both transrnission and reflection modes. System contains, HP 8510C Network Analyzer, 8517B Test Set, 83651A Synthesized Sweeper and an 86032A Lightwave Test Set. Modulation frequency range: 0.045 to 50 GHz. Optical source center wavelength: 1550 to 1560 nm. Optical output return loss: > 30 dB. Optical input return loss: > 25 dB. Average optical output power (modulator set to minimum insertion loss): > 3 dBm. Average optical output power (modulator set at quadrature): > 0 dBm. RF modulation power (for E/O mode): 0.045–30 GHz > 5 dBm, 30–50 GHz > 2.5 dBm. Maximum operating optical input power (to optical receiver input): Do not exceed 4 mW (6 dBm).



 

Standard Calibration $1,595.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86030A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your Keysight (Agilent) 86030A CALIBRATION and/or Keysight (Agilent) 86030A 50 GHz Lightwave Component Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: