Keysight (Agilent) N4373A REPAIR and Keysight (Agilent) N4373A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) N4373A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N4373A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our
 used Lightwave Measurement System page or new Lightwave Measurement System page

 
   Keysight (Agilent) N4373A   Description / Specification:    
Keysight (Agilent) N4373A Lightwave Component Analyzer

Lightwave Component Analyzer, S-Parameter analysis (linear transmission / reflection analysis). System bandwidth: (opt 300) 300 kHz to 3 GHz ENA, (opt 301) 300 kHz to 8.5 GHz ENA, (opt 302) 300 kHz to 20 GHz PNA-L 2 port, (opt 303) 300 kHz to 20 GHz PNA-L 4 port. Wavelength: (opt 100) 1310 nm Wavelength (only with N4373A-200, 201 or 202), (opt 101) 1550 nm Wavelength (only with N4373A-200 or 201 or 202), (opt 102) 1310 & 1550 nm Wavelength (only with N4373A-200 or 201 or 202). Frequency: (opt 200) 3 GHz Frequency single-mode fiber, (opt 201) 8.5 GHz Frequency single-mode fiber, (opt 202) 20 GHz Frequency single-mode fiber. Optical Input Wavelength range: 800 nm to 1650 nm. LAN, USB and GPIB instrument control and data interfaces.



 

Standard Calibration $1,780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N4373A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.


Please contact us for your Keysight (Agilent) N4373A REPAIR and/or Keysight (Agilent) N4373A Lightwave Component Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: