Keysight (Agilent) E4866A REPAIR and Keysight (Agilent) E4866A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) E4866A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E4866A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pattern Generator?
Shop for Comparable Products on our  used Pattern Generator page

 
   Keysight (Agilent) E4866A   Description / Specification:    
Keysight (Agilent) E4866A ParBERT Generator Module, VXI

Agilent E4866A ParBERT 10.8 Gb/s Generator Module (VXI). Data range 9.5 Gbit/s to 10.8 Gbit/s. Clock range: 9.5 GHz to 10.8 GHz. Delay Range: 0 to 300 ns. Delay Resolution: 1 ps. Accuracy: ±20 ps ± 50 ppm relative to the zero-delay placement. Skew between modules of same type: 50 ps typ. after deskewing at customer levels and unchanged system frequency. Segment length resolution: 256bits. Patterns: Memory-based up to 33,554,432bits, PRBS/PRWS 2^n -1, n= 7, 9, 10, 11, 15, 23, 31. Marker Density: 1/8, 1/4, 1/2, 3/4, 7/8 at 2^n -1, n=7, 9, 10, 11, 15. Errored PRBS/PRWS: 2^n -1, n= 7, 9, 10, 11, 15. Extended ones or zeros: 2^n -1, n= 7, 9, 10, 11, 15. Clock patterns: Divide or multiply by 1, 2, 4. Output: 1, single ended, AC coupled, to be used into 50 Ohm. Duty cycle 50% typical. Maximum external voltage: -2.2V to +3.3 V. Amplitude/Resolution: 0.5Vpp fixed typ. Transition times (20%-80%): sine wave. Clock Jitter < 2ps RMS.



 

Standard Calibration $935.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E4866A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your Keysight (Agilent) E4866A REPAIR and/or Keysight (Agilent) E4866A ParBERT Generator Module, VXI CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: