Keysight (Agilent) E5052B CALIBRATION and Keysight (Agilent) E5052B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E5052B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Analyzer?
Shop for Comparable Products on our  used Signal Analyzer page

 
   Keysight (Agilent) E5052B   Description / Specification:    
Keysight (Agilent) E5052B 7 GHz Signal Source Analyzer

The Agilent E5052B 10 MHz to 7 GHz Signal Source Analyzer features a number of enhanced performance characteristics, partially shown in the key features above. And it offers high measurement throughput and best usability in characterizing VCO or other types of high frequency signal sources, as well as clock jitter evaluation in high-speed data communication systems. The E5052B's frequency range can be extended up to 26.5 GHz with the E5053A, and up to 110 GHz with the E5053A plus Agilent 11970 series mixers. Analysis capabilities include; Simultaneous transient measurements for frequency, phase and power over time. Capture of unexpected frequency change with video trigger function. Complete VCO characterization with outstanding low-noise DC sources(frequency/power/DC-supply-current over Vc and Vs). Clock jitter measurement with femto-second resolution. Specifications. Frequency range: 10 MHz to 7 GHz. Input power level: -20 dBm to +20 dBm (RF > 30 MHz), -15 dBm to +20 dBm (RF < 30 MHz). Measurement Parameters: Frequency, RF power, and DC current. RF power Resolution: 0.01 dB. RF power Accuracy: ±0.5 dB (RF: 30 MHz to 3 GHz, > -10 dBm), ±1 dB. Frequency Resolution: 10 Hz, 1 kHz, 64 kHz. Frequency Accuracy: ± (frequency resolution + time base accuracy). Phase noise Offset frequency range: 1 Hz to 100 MHz. Spectrum monitor: 15 MHz max Span, RBW = 1 Hz to 100 kHz. DC sources Control voltage: -15 to +35 volt, 20 mA max. Display Size: 10.4 in TFT color LCD. Option 011, Delete frequency and power sweep function and limit correlation number and offset frequency.



 

Standard Calibration $920.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E5052B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) E5052B CALIBRATION and/or Keysight (Agilent) E5052B 7 GHz Signal Source Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: