Keysight (Agilent) E8257C CALIBRATION and Keysight (Agilent) E8257C REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E8257C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   Keysight (Agilent) E8257C   Description / Specification:    
Keysight (Agilent) E8257C 20/40 GHz PSG Analog Signal Generator

The Agilent E8257C PSG analog signal generator delivers industry-leading output power, superior level accuracy, low phase noise, and precision analog modulation for accurate characterization of RF and microwave components and devices. It typically eliminates the need of an external amplifier for testing high power devices and minimizes test uncertainty to identify errors early in the design process and reduce development time. The PSG sets a performance mark by providing advanced capabilities; including narrow pulses for radar test applications and ramp sweep for continuous sweep measurements and fully automated use with the Agilent 8757D scalar network analyzer. Customize the Agilent E8257C PSG for RF and microwave test applications ranging from LO substitution and simple distortion test to general-purpose troubleshooting and transceiver design verification. A variety of optional performance enhancements and accessories are available. Its modular architecture makes it easy to configure the PSG to address your specific test application, providing the level of performance you need today and the option to upgrade in the future. Specifications. Frequency range: 250 kHz to 20 GHz or 250 kHz to 40 GHz. Frequency resolution: 0.001 Hz. High output power at 20 GHz: +20 dBm (+25 dBm typical). Enhanced phase noise option with carrier frequency = 10 GHz: -74 dBc/Hz (-84 dBc/Hz) at 100 Hz offset, -98 dBc/Hz (-115 dBc/Hz) at 1 kHz offset. CW Level accuracy ± 10 dBm: ± 0.8 dB (2 to 20 GHz), ± 0.9 dB (20 to 40 GHz). Standard pulse modulation Frequency >= 3.2 GHz: On/Off ratio 80 dB, Rise/Fall time 10 ns (6 ns typical). RF modulation bandwidth Int. baseband generator: 80 MHz. Options. 520, 250 kHz to 20 GHz analog. 540, 250 kHz to 40 GHz analog. 1E1, Attenuator. 1EA, High output power. 1E6, Narrow pulse modulation below 3.2 GHz. UNR, Enhanced phase noise. 007, Ramp sweep/scalar interface. 1EM, Rear panel connectors. 1ED, Type-N connector (20 GHz models only).



 

Standard Calibration $890.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E8257C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your Keysight (Agilent) E8257C CALIBRATION and/or Keysight (Agilent) E8257C 20/40 GHz PSG Analog Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: