|
|
The Agilent MSO9104A Infiniium 1 GHz, 4 analog plus 16 digital channels is equipped with a 15” XGA display and comes in a package that is just 9” (23 cm) deep and weighs only 26 pounds (11.8 kg) to preserve your limited bench space. This scope is engineered to give you the broadest measurement capability available to meet your needs both today and in the future. 16 fully integrated, time-aligned digital channels give you insight into timing relationships and allow precise triggering. Take advantage of optional integrated protocol viewers to quickly isolate physical layer issues causing errors. Analog bandwidth (–3 dB) 50 ohm: 1.0 GHz. Typical Rise Time / Fall Time 10% to 90% at 50 ohm: 253 ps. Typical Rise Time / Fall Time 20% to 80% at 50 ohm: 174 ps. Input channels: 4 analog + 16 digital. Input impedance: 50 ohm ± 2.5%, 1 Mohm ± 1% (11pF typical). Input sensitivity: 1 Mohm: 1 mV/div to 5 V/div, 50 ohm: 1 mV/div to 1 V/div. Bandwidth limit: 20 MHz on 1 Mohm input ; 500 MHz up to full scope bandwidth in increments of 500 MHz. Vertical resolution: 8 bits, =12 bits with averaging. DC gain accuracy: ± 2% of full scale at full resolution on channel scale ± 5 °C from cal temp. Maximum input voltage: 1 Mohm: 150V RMS or DC, CAT I ± 250 V (DC + AC) in AC coupling, 50 ohm: 5 Vrms. Digital Channels; Input channels: 16 digital channels. Threshold groupings: 16 digital channels Pod 2, D15 – D8. Threshold selections: TTL (1.4V), CMOS, (5.0V, 3.3V, 2.5V), ECL (-1.3V), PECL (3.7V), user defined (±8.00 V in 100 mV increments). Maximum input voltage: ±40 V peak CAT I. Threshold accuracy: ±(100 mV + 3% of threshold setting). Input dynamic range: ±10 V about threshold. Minimum input voltage swing: 500 mV peak-to-peak. Input impedance (flying leads): 100 kohm ± 2% (~ 8 pF) at probe tip. Resolution: 1 bit. Analog bandwidth: 400 MHz. Horizontal; Channel-to-channel skew (digital): 2 ns typical. Glitch detect (digital): >= 2.0 ns. Main time base range: 5 ps/div to 20 s/div. Horizontal position range: 0 to ± 200 s. Delayed sweep range: 1 ps/div to current main time base setting. Resolution: 1 ps. Modes: Main, delayed, roll (200 ms to 20 sec). Maximum real-time sample rate: 4 ch x 10 GS/s or 2 ch x 20 GS/s. Option 50M, 50 Mpts on 4 channels, 100 Mpts on 2 channels. Option 100, 100 Mpts on 4 channels, 200 Mpts on 2 channels. Option 200, 200 Mpts on 4 channels, 400 Mpts on 2 channels. Option 500, 500 Mpts/ 250 Mpts on 4 channels, 1 Gpts/ 500 Mpts on 2 channels (single/repetitive mode).
|