Keysight (Agilent) 53210A CALIBRATION and Keysight (Agilent) 53210A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 53210A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Frequency Counter? Shop for Comparable Products on our   new Frequency Counter page

 
   Keysight (Agilent) 53210A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 53210A Single-channel, 350 MHz RF Frequency Counter

The Agilent 53210A single-channel, 350 MHz RF frequency counter is optimized to provide fast, precise frequency measurements with a simplified user interface. An optional microwave channel can be added to measure 6 or 15 GHz. Input Channel Characteristics. Channels: Ch 1 Standard (DC - 350 MHz), Ch 2 Optional (6 or 15 GHz). Frequency range DC coupled: DC (1 mHz) to 350 MHz (2.8 ns to 1000 sec). Frequency range AC coupled: 50 ohm or 1 Mohm 10 Hz - 350 MHz. Input range: ±5 V (±50 V) full scale ranges. Sensitivity (typ): 20 mVpk (DC - 100 MHz), 40 mVpk (> 100 MHz). Noise: 500 µVrms (max), 350 µVrms (typ). Input event Threshold levels: ±5 V (±50 V) in 2.5 mV (25 mV) steps. Maximum input 50 ohm damage level: 1 W. Frequency, period (average) measurements Ch 1 or optional Ch 2: 10 digits/s. Frequency, period Range: DC (1 mHz) to 350 MHz (2.8 ns to 1000 s). Gate Source: Time, external. Gate time (step size): 1 ms - 1000 s (10 µs). Trigger source: Internal, external, bus, manual. Timebase reference: Internal, external, or auto. Display: 4.3" Color TFT WQVGA (480 x 272), LED backlight. Programming interface: 10/ 100/ 1000 LAN (LAN Sockets and VXI-11 protocol), USB 2.0 (USB-TMC488 protocol), GPIB (IEEE-488.1, IEEE-488.2 protocol). Options. Option 010 Ultra-high-stability OCXO timebase. Option 106 6 GHz microwave input. Option 115 15 GHz microwave input. Option 201 Add rear panel parallel inputs for baseband channels. Option 202 Optional microwave input - front Type N (default if 106 or 115 ordered). Option 203 Optional microwave input - rear panel SMA(f) connector. Option 300 Add internal lithium ion smart battery and charger for unstable AC power or timebase stability.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 53210A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) 53210A CALIBRATION and/or Keysight (Agilent) 53210A Single-channel, 350 MHz RF Frequency Counter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: