Keysight (Agilent) N2790A CALIBRATION and Keysight (Agilent) N2790A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N2790A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our  used Oscilloscope Accessory page

 
   Keysight (Agilent) N2790A   Description / Specification:   Spec Sheet 
Keysight (Agilent) N2790A 100 MHz 1400 V High-voltage Differential Probe

The Agilent N2790A 100 MHz High-voltage differential probe offers user selectable attenuation settings that make it highly versatile, allowing it to be used for a broad range of applications. It can make safe and accurate floating measurements with an oscilloscope. Performance characteristics. Bandwidth (-3dB): >=100 MHz probe bandwidth. Rise time (calculated): <= 3.5 ns. Attenuation: 50:1 / 500:1. Gain accuracy (% of reading): ± 2% at 20-30°C. DC CMRR: –70 dB at 500 VDC. AC CMRR: –80 dB at 50/60 Hz, –50 dB at 1 kHz, –50 dB at 1 MHz. Propagation delay: 14 nsec at 50:1, 12.8 nsec at 500:1. Input R//C (each input to ground): 4 Mohm // 7 pF. Input R//C (between inputs): 8 Mohm // 3.5 pF. Max differential operating voltage (DC+PeakAC): ±1400 V at 500:1, ±140 V at 50:1. Max common mode operating voltage (RMS or DC+PeakAC): ±1000 V (CAT II), ±600 V (CAT III). Max nondestructive voltage: ±1500 VDC + Peak AC differential mode. Output maximum voltage range: ±2.8V into 1 Mohm (500:1). Output offset: Adjustable. Noise referenced to input: < 300 mVrms at 500:1, < 50 mVrms at 50:1.



 

Standard Calibration $190.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N2790A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) N2790A CALIBRATION and/or Keysight (Agilent) N2790A 100 MHz 1400 V High-voltage Differential Probe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: