Keysight (Agilent) 34411A REPAIR and Keysight (Agilent) 34411A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 34411A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 34411A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

 
   Keysight (Agilent) 34411A   Description / Specification:    
Keysight (Agilent) 34411A 6 1/2 Digit Digital Multimeter

The Agilent 34411A 6-1/2 Digit Digital Multimeter offers improved accuracy, measurement speed and throughput, expanded measurement capability, and modern computer interfaces including LAN and USB. A dual display offers both dual measurement capabilities and ease of use for setup and configuration. In addition to DCV, ACV, DCI, ACI, 2-wire and 4-wire Resistance, Frequency, Period, Continuity and Diode Test, the 34411A offers Temperature and Capacitance measurement capabilities. It has the ability to make 50,000 readings per second at 41/2 digits, and with Analog Level Triggering, programmable Pre- and Post- Trigger and 1 million readings of volatile memory in addition to 50,000 reading of non-volatile memory, the 34411A provides the ability to capture low-frequency waveforms, characterize device performance and transfer results for analysis on your computer. A front panel data logger function allows the user to set the meter up to make unattended, paced measurements over a fixed time or number of events, then pull up the results later for review or transfer to a computer for analysis. It features a built-in Graphical Web Interface that allows the user to interactively control the DMM without the hassle of programming at all, and a LAN Extensions provides the next generation I/O for system applications requiring the highest throughput. Transfer rates of over 100,000 readings/sec are attainable ensuring even the most data intensive measurements are fast and efficient.
Specifications.

AC Current: 100uA - 3A.
AC Voltage Range: 100mV - 750V.
DC Current: 100uA - 3A.
DC Voltage Range: 100mV - 1000V.
Frequency Range: 3Hz - 300KHz.
Interface: LAN, USB - GPIB.
Number of Digits: 6.5.
Resistance Range: 100ohm - 1Gohm.
6½ digit resolution.
50,000 readings/sec. @ 4 1/2 digits to the PC.
1M reading memory.
Analog level and pre/post triggering.
LAN, USB & GPIB standard.
Capacitance & temperature measurements.
Data logger for improved usability.
50,000 reading non-volatile memory.
LXI Class C Compliant.



 

Standard Calibration $140.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 34411A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output


Please contact us for your Keysight (Agilent) 34411A REPAIR and/or Keysight (Agilent) 34411A 6 1/2 Digit Digital Multimeter CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: