Keysight (Agilent) E8267D CALIBRATION and Keysight (Agilent) E8267D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E8267D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   Keysight (Agilent) E8267D   Description / Specification:    
Keysight (Agilent) E8267D 250 kHz to 13/20/31.8/44 GHz PSG Vector CW Signal Generator

The Agilent E8267D PSG Vector Signal Generator delivers industry-leading output power, superior level accuracy, low phase noise, and precision modulation for accurate characterization of RF and microwave components and devices. It features: CW output from 250 kHz to the highest operating frequency, depending on the option. Frequency resolution to 0.001 Hz. List and step sweep of frequency and amplitude, with multiple trigger sources. User flatness correction. External diode detector leveling. Automatic leveling control (ALC) on and off modes; power calibration in ALC- off mode is available, even without power search. 10 MHz reference oscillator with external output. RS- 232, GPIB, and 10Base-T LAN I/O interfaces.
Specifications.

Frequency range: 250 kHz to 13/20/31.8/44 GHz (option dependent).
Frequency resolution, CW: 0.001 Hz.
High output power: +20 dBm (option dependent).
Spectral purity: -55 dBc (max).

Options.
513, Frequency range from 250 kHz to 13 GHz.
520, Frequency range from 250 kHz to 20 GHz.
532, Frequency range from 250 kHz to 31.8 GHz.
544, Frequency range from 250 kHz to 44 GHz.
602, Internal baseband generator, 64 MSa memory.
003, Digital output connectivity with N5102A.
004, Digital input connectivity with N5102A.
007, Analog ramp sweep.
009, 8 GB removable flash memory.
016, Wideband external I/Q inputs.
403, Calibrated AWGN.
409, Global positioning system (GPS) personality.
423, Scenario generator for GPS personality.
UNX, Ultra low phase noise.
UNY, Enhanced ultra low phase noise.
UNT, AM, FM, phase modulation, and LF output.
UNU, Pulse modulation.
UNW, Narrow pulse modulation.
1ED, Type-N (f) RF output connector.
1EH, Improved harmonics below 2 GHz.
1EM, Moves all front panel connectors to the rear panel.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your Keysight (Agilent) E8267D CALIBRATION and/or Keysight (Agilent) E8267D 250 kHz to 13/20/31.8/44 GHz PSG Vector CW Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: