Keysight (Agilent) 3577A REPAIR and Keysight (Agilent) 3577A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 3577A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 3577A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 3577A   Description / Specification:    
Keysight (Agilent) 3577A 200 MHz Network Analyzer

The HP 3577A is a high performance network analyzer for audio, video, baseband and IF applications from 5 Hz to 200 MHz. The 3577A makes precision measurements to characterize filters, amplifiers, crystal devices, cables, and subsystems used in communications, telecommunications, cq,nsumer electronics, components and general purpose testing. Convenient soft-key selection of measurement functions allows you to quickly measure transfer functions, magnitude/phase, insertion loss/gain, attenuation, electrical length and gain compression. In addition, measurement of phase distortion parameters such as group delay and deviation from linear phase can be made with high resolution. With the HP 3577A's flexible receiver input impedances, you can measure in either 50 ohm or high impedance (1 M-ohm) environments. Use the HP 35677 A/B S-Parameter Test Sets or the HP 35676A/B Reflection/Transmission Test Kits with the HP 3577A to make reflection measurements such as return loss, reflection coefficient and impedance in 50 ohm or 75 ohm systems, while simultaneously displaying transmission parameters. Specifications. Source Frequency Range: 5 Hz to 200 MHz. Frequency Resolution: 0.001 Hz. Source Amplitude Range: +15 dBm to -49 dBm (1.26 Vrms to 793ยต. Vrms: 2dBV to -62 dBV) into a 50 ohm load. Amplitude Resolution: 0.1 dB. Flatness: 1.5 dBp-p from 5 Hz to 200 MHz. Sweep Time: 100 ms/span to 200 ms/span for frequency sweep; 1 ms/step to 16 s/step for amplitude sweep. Input Frequency Range: 5 Hz to 200 MHz. Inputs: Three receiver inputs (A, Band R). Input Connectors: 500 Type N female. Resolution Bandwidth: Selectable 1 kHz, 100 Hz, 10 Hz, or 1 Hz.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 3577A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your Keysight (Agilent) 3577A REPAIR and/or Keysight (Agilent) 3577A 200 MHz Network Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: