Keysight (Agilent) 37711A CALIBRATION and Keysight (Agilent) 37711A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 37711A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) 37711A   Description / Specification:    
Keysight (Agilent) 37711A T1/Datacom Test Set

The HP 37711A T1/Datacom Test Set tests at T1 (DSX and line), RS-232, RS-449 (balanced), and V.35 interfaces. The instrument consists of the HP 37701A T1 tester, plus the HP 15901A datacom module (available separately for existing HP 37701A users). Datacom Interfaces: RS-232, RS-449, V.35, DTE, or DCE. Data Rates: 600 b/s to 1.544 Mb/s (synchronous: built-in synthesizer); 50 b/s to 19.2 kb/s (asynchronous). RS-232 Breakout: Patch point, monitors, voltage sources, and switches. RS-449/V.35: Activity indicators on data, clock, and control circuits. Test Patterns: 63,511,2047, 2^15 -1 PRBS, QRSS, (all invertible); all 1s, 1010 ... , 24-bit word, FOX message. Measurements: Errors, BER, blocks, block errors, BLER, error seconds, % EFS, clock slips, alarms, Tx and Rx frequency, G.821 analysis. Control-Circuit Timing: Measures times between selectable start/stop events; timing range 1s, resolution 0.1 ms. Transition Diagrams: For MON, RTS, CTS, DTR, DSR and DCD



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 37711A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Singlemode Fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your Keysight (Agilent) 37711A CALIBRATION and/or Keysight (Agilent) 37711A T1/Datacom Test Set REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: