Keysight (Agilent) 37717A CALIBRATION and Keysight (Agilent) 37717A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 37717A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) 37717A   Description / Specification:    
Keysight (Agilent) 37717A PDH/SDH/ATM Test Set Mainframe

The HP 37717A transmission tester provides modular upgradeable solutions for field maintenance, installation, and commission of PDH, SDH, and ATM networks it includes jitter generation and measurements. Measurements: Error analysis to G.821, G.826 and M2100 (M550), based on bit errors and code errors (FAS, CRC4, BIP, REBE); frequency offset, jitter. Interfaces; UPDH: 0.7, 2, 8, 34, and 140 Mb/s to G.703. SPDH: 2, 8, 34, and 140 Mb/s to G.703. SDH: STM-1E, STM-l optical (1310 nm or 1550 nm) and STM-4 optical (1310 nm or 1550 nm). Multiple outputs: 3 additional PDH outputs. PDH Alarms: AIS, signal loss, pattern loss, errors, frame loss, CAS/CRC multiframe loss, remote alarm, and remote multiframe alarm. SDH Alarms: MS AIS, Path AIS, MS FERF, Path FERF, TU Loss of Pointer, TU Path AIS, TU Path FERF. SDH Payload Mapping: 2 Mb/s (TU-12), 34 Mb/s (TU-3), and 140 Mb/s as G.709. ATM User Cell Generation; Header values: Cell format, GFC, VPI, VCI, PTI, CLP. Error add: Cell header or payload. ATM OAM Cell Generation: Fault management: F4, F5, OAM cell flow, alarm AIS, and FERF. ATM Cell Receive; Cell selection: UNI/NNI, GFC, VPI, VCI, PTI, CLP. Alarms selection: VP and VC AIS and FERF, loss of pattern payload, cells. ATM Cell Analysis; OOS measurements: Mean cell rate, BIP-8, cell, and HEC errors, cell misinsertion , loss and transfer delay. ISM: Mean cell rate, BIP-8, HEC, and non-conforming cells. Jitter: Generation and measurement at 2, 8, 34, and 140 Mb/s; 155 and 622 Mb/s (0.171) plus 2 Mb/s wander and estimated frame slip measurements



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 37717A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your Keysight (Agilent) 37717A CALIBRATION and/or Keysight (Agilent) 37717A PDH/SDH/ATM Test Set Mainframe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: