Keysight (Agilent) 37718A REPAIR and Keysight (Agilent) 37718A CALIBRATION
The Keysight (Agilent) 37718A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 37718A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 37718A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) 37718A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 37718A OmniBER 718 Communications Performance Analyzer

The Agilent OmniBER 718 communications performance analyzer offers a single box field portable multi-rate SDH/SONET tester. The 37718A has multi-rate BER and jitter testing (opt 200) from 64 kb/s to 2.5 Gb/s (STM-16/OC-48). Concatenated payloads at all synchronous rates up to 2.5 Gb/s. Full PDH/T-carrier testing. Direct measurement of protection switching time. Powerful thru-mode testing for SDH/SONET ring turn-up. Comprehensive SDH/SONET overhead testing. Packet over SONET/SDH (POS) and ATM payloads up to 2.5 Gb/s. Fast access to key measurement tasks via Smart Test. Optical power and line frequency measurements. J0 section trace for DWDM testing. J1 and J2 path trace for network path testing. Optional integrated graphical printer. Line frequency offset. Transmit and Receive can be independently configured. Instrument Options: (001) SDH (ITU-T) Test. (002) Dual standard SONET/SDH (ANSI/ITU-T). (010) Structured PDH 2/8/34/140Mb/s. (011) DSN/PDH Rates DS1/DS3/E1/E3. (012) PDH/T-carrier DS1, DS3, 2 Mb/s, 8 Mb/s, 34 Mb/s & 140 Mb/s. (014) 2 Mb/s into DS3 mapping (also requires option 012). (104) Optical interface 1310 nm only. (105) Optical interface 1550 nm only. (106) Optical interface Dual wavelength 1310 nm/1550 nm. (200) Adds jitter Tx/Rx capability to all selected rates. (204) 2.5G Multi-rate 1310nm BER + Jitter. (205) 2.5G Multi-rate 1550nm BER + Jitter. (206) 2.5G Multi-rate 1310/1550nm BER + Jitter. (210) Adds optimized jitter receiver intrinsics(requires opt 200). (300) ATM payloads(up to highest rate)(requires option 350/355). (310) POS payloads(up to highest rate)(requires option 350/355). (350) Advanced payload engine, Provides additional necessary hardware for ATM and POS. (355) Advanced payload engine, providing service disruption history and timestamping and AIS measurements on optical signals to highest rate (must be included for ATM (opt 300) and/or POS (opt 310)). (600) Remote Omnibook controller. (601) RS-232-C, GPIB and LAN remote control interfaces. (602) 80-column in-lid graphics printer.



 

Standard Calibration $785.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 37718A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your Keysight (Agilent) 37718A REPAIR and/or Keysight (Agilent) 37718A OmniBER 718 Communications Performance Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: