Keysight (Agilent) 4396B CALIBRATION and Keysight (Agilent) 4396B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 4396B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 4396B   Description / Specification:    
Keysight (Agilent) 4396B RF Network/Spectrum/Impedance Analyzer

100 kHz to 1.8 GHz, Network Analyzer. 1 mHz resolution, -60 to 20 dBm output power range, >120 dB @ 10 Hz IFBW dynamic range, +/-0.05 dB/0.3 deg. Dynamic Accuracy, Full two-port calibration. Spectrum Analyzer Specs: 2 Hz to 1.8 GHz, <-113 dBc/Hz noise sidebands, typical at 10 kHz offset, 1 Hz to 3 MHz in 1-2-10 steps resolution bandwidth, >100 dB third-order dynamic range, <+/-1.0 dB overall level accuracy, <-147 dBm/Hz at 1 GHz Sensitivity. Impedance Analyzer Specs: 100 kHz to 1.8 GHz, 2 to 5 ohm meas. range, +/-3% Z accuracy, -66 to +14 dBm source level, +/-40 V DC bias (20mA max), OPEN/SHORT/LOAD port extension compensation.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 4396B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your Keysight (Agilent) 4396B CALIBRATION and/or Keysight (Agilent) 4396B RF Network/Spectrum/Impedance Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: