Keysight (Agilent) B1510A CALIBRATION and Keysight (Agilent) B1510A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) B1510A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Semiconductor Tester?
Shop for Comparable Products on our  used Semiconductor Tester page

 
   Keysight (Agilent) B1510A   Description / Specification:    
Keysight (Agilent) B1510A High power source/monitor Unit (HPSMU)

The Agilent B1510A High power source/monitor unit (HPSMU) features range up to 200 V/1 A with 4-quadrant operation. Minimum measurement resolution 10 fA/2 μV. It uses two slots in a B1500A Mainframe.
Specifications.

Voltage (high resolution ADC).
Range, Force resolution, Measure resolution, Force accuracy ±(% read value + offset voltage V), Measure accuracy (% read value + offset voltage V), Maximum current .
  ±2 V, 100 μV, 2 μV, ±(0.018% + 400 μV), ±(0.01% + 140 μV), 1 A.
  ±20 V, 1 mV, 20 μV, ±(0.018% + 3 mV), ±(0.009% + 900 μV), 1 A. 
  ±40 V, 2 mV, 40 μV, ±(0.018% + 6 mV), ±(0.01% + 1 mV), 500 mA.
  ±100 V, 5 mV, 100 μV, ±(0.018% + 15 mV), ±(0.012% + 2.5 mV), 125 mA.
  ±200 V, 10 mV, 200 μV, ±(0.018% + 30 mV), ±(0.014% + 2.8 mV), 50 mA.

Current (high resolution ADC).
Range, Force resolution, Measure resolution, Force accuracy ±(% + A + A), Measure accuracy (% + A + A), Max voltage.
  ±1 nA, 50 fA, 10 fA, ±(0.1%+300 fA+1 fA x Vo), ±(0.1%+200 fA+1 fA x Vo), 200 V.
  ±10 nA, 500 fA, 10 fA, ±(0.1%+3 pA+10 fA x Vo), ±(0.1%+1 pA+10 fA x Vo), 200 V.
  ±100 nA, 5 pA, 100 fA, ±(0.05%+30 pA+100 fA x Vo), ±(0.05%+20 pA+100 fA x Vo), 200 V.
  ±1 μA, 50 pA, 1 pA, ±(0.05%+300 pA+1 pA x Vo), ±(0.05%+100 pA+1 pA x Vo), 200 V.
  ±10 μA, 500 pA, 10 pA, ±(0.05%+3 nA+10 pA x Vo), ±(0.04%+2 nA+10 pA x Vo), 200 V.
  ±100 μA, 5 nA, 100 pA, ±(0.035%+15 nA+100 pA x Vo), ±(0.03%+3 nA+100 pA x Vo), 200 V.
  ±1 mA, 50 nA, 1 nA, ±(0.04%+150 nA+1 nA x Vo), ±(0.03%+60 nA+1 nA x Vo), 200 V.
  ±10 mA, 500 nA, 10 nA, ±(0.04%+1.5 μA+10 nA x Vo), ±(0.03%+200 nA+10 nA x Vo), 200 V.
  ±100 mA, 5 μA, 100 nA, ±(0.045%+15 μA+100 nA x Vo), ±(0.04%+6 μA+100 nA x Vo), 200 V (Io ≤ 50 mA)/ 100 V (50 mA < Io ≤ 125 mA)/ 40 V (125 mA < Io ≤ 500 mA)/ 20 V (500 mA < Io ≤ 1 A).
  ±1 A, 50 μA, 1 μA, ±(0.4%+300 μA+1 μA x Vo), ±(0.4%+150 μA+1 μA x Vo), 200 V (Io ≤ 50 mA)/ 100 V (50 mA < Io ≤ 125 mA)/ 40 V (125 mA < Io ≤ 500 mA)/ 20 V (500 mA < Io ≤ 1 A).

Power consumption.
Voltage source mode (Ic is the current compliance setting):
  20 x Ic (W) (2 to 20V),
  40 x Ic (W) (40V),
  100 x Ic (W) (100V),
  200 x Ic (W) (200V).
Current source mode (Vc is the voltage compliance setting and Io is output current):
  20 x Io (W) (Vc ≤ 20),
  40 x Io (W) (20 < Vc ≤ 40),
  100 x Io (W) (40 < Vc ≤ 100),
  200 x Io (W) (100 < Vc ≤ 200).



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) B1510A CALIBRATION and/or Keysight (Agilent) B1510A High power source/monitor Unit (HPSMU) REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: