Keysight (Agilent) E9301B CALIBRATION and Keysight (Agilent) E9301B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E9301B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   Keysight (Agilent) E9301B   Description / Specification:    
Keysight (Agilent) E9301B 6 GHz Average Power Sensor

The Agilent E9301B E- Series power sensor is a true average, wide dynamic range RF microwave power sensor. It is based on a dual sensor diode pair/attenuator/diode pair proposed by Szente et. al. in 1990. This technique ensures the diodes in the selected signal path are kept in their square law region, thus the output current (and voltage) is proportional to the input power. This sensor measures average RF power on a wide variety of modulated signals and are independent of the modulation bandwidth. It is ideally suited to the average power measurement of multi- tone and spread spectrum signals such as CDMA, W- CDMA and digital television formats. The Agilent E9301B power sensor is NOT compatible with the earlier Agilent 430- Series, Agilent E1416A, or Agilent 70100A power meters. It is compatible ONLY with the Agilent EPM series power meters. Also, not all Agilent EPM series power meters are immediately compatible - your power meter must use firmware and Digital Signal Processing (DSP) code from a specific release onwards.
Specifications.
Frequency Range: 10 MHz to 6.0 GHz.
Connector Type: Type - N (Male) 50 ohm.
Maximum SWR (25 °C ± 10 °C): 1.12 (10 MHz to 6 GHz).
Maximum Power Average 0 °C to 35 °C: 30 W, 500 Wps per pulse.
Maximum Power <6.0 GHz: 500 W Peak, 500 Wps per pulse.



 

Standard Calibration $270.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E9301B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your Keysight (Agilent) E9301B CALIBRATION and/or Keysight (Agilent) E9301B 6 GHz Average Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: