Keysight (Agilent) 66103A CALIBRATION and Keysight (Agilent) 66103A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 66103A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 66103A   Description / Specification:    
Keysight (Agilent) 66103A 35V 4.5A Single Output DC Power Module

The HP 66103A DC Power Module is for use with the 66000 modular power system mainframe. Specifications. Output Voltage: 35 V. Output Current: 4.5 A. Output Power: 150 W. Programming accuracy Voltage: 0.03% + 13 mV. Programming accuracy Current: 0.03% + 2 mA. Readback accuracy (via HP-IB or keyboard display at 25 C +/- 5 C) Voltage 0.02% + 8 mV, Current 0.02% + 2 mA. Ripple and noise (20 Hz to 20 MHz): Constant voltage rms 5 mV, peak to peak 10 mV, Constant current rms 2 mA. Line regulation voltage: 1 mV. Line regulation current: 0.1 mA. Load regulation voltage: 1 mV. Load regulation current: 0.2 mA. Transient Response Time: Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of rated current. Isolation: Output terminals can be up floated to ± 240 Vdc from chassis ground. Remote Sensing: Up to half the rated output voltage can be dropped across in each load lead. Add 2 mV to the voltage load regulation specification for each 1-V change in the negative output lead caused by a load current change. Command Processing Time: The average time for the output voltage to change after getting an HP-IB command is 20 ms. Output programming Response Time (with full resistive load) : The rise and fall time (10% to 90% and 90% to 10%) of the output voltage is less tban 20 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of the final value in less than 120 ms. Down-Programming: An active down-programmer sinks approximately 10% of the rated output current. Agilent 66103A Options. Opt 760: Open/Close and Polarity Reversal Relays.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 66103A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) 66103A CALIBRATION and/or Keysight (Agilent) 66103A 35V 4.5A Single Output DC Power Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: