Keysight (Agilent) 70841A CALIBRATION and Keysight (Agilent) 70841A REPAIR

A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 70841A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pattern Generator?
Shop for Comparable Products on our
 used Pattern Generator page

   Keysight (Agilent) 70841A   Description / Specification:    
Keysight (Agilent) 70841A Pattern Generator, MMS

HP 70841A pattern generator module for Modular Measurement System (MMS). Occupies 4/8 module slot and has seven I/O ports, six on the front panel and one on the rear. Operating Frequency Range: 100 Mbit/s to 3 Gbit/s. Patterns: PRBS Test Patterns: 2^23-1, polynomial D^23 + D^18 + 1 = 0, inverted; 2^15-1, polynomial D^15 + D^14 + 1 = 0, inverted; 2^10-1, polynomial D^10 + D^7 + 1 = 0, inverted & 2^7-1, polynomial D^7 + D^6 + 1 = 0, inverted. Zero Substitution/Variable Mark Density Test Patterns. Word Test Patterns. Alternating Word Test Patterns. Data Output Inhibit. Error Add. Data Polarity. Clock Input: Waveform: Sinewave from the HP 70322A or 70320A signal generators. Amplitude Range: ± 4 dBm. Return loss: Over operating frequency range: > 10 dB typical. Impedance: 50 ohm nominal. Interface: ac coupled. Connector: N-type female. Data and Data Outputs: Format: NRZ. Levels: Selectable amplitude and offset or nominal ECL, into 50 ohm to 0 V or 50 ohm to -2 V. Amplitude Range: 0.25 to 2 V p-p nominal. Amplitude Resolution: 10 mV nominal. ECL High level: -0.90 V, nominal. ECL Low level: -1.75 V nominal. Delay: Data delay variation vs clock output transitions: Range: ± 1 ns nominal, Resolution: 5 ps nominal. Jitter: Specified for 2^23-1 PRBS, 2 V p-p output amplitude, 0 V high level and measured relative to clock/32 trigger pulse. Clock and Clock Outputs: Amplitude: Range: 0.5 to 2 V p-p nominal, Resolution: 10 mV nominal. Transition Times: 10% to 90% at 25°C (typical). 3GHz, < 120 ps


Standard Calibration $500.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 70841A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your Keysight (Agilent) 70841A CALIBRATION and/or Keysight (Agilent) 70841A Pattern Generator, MMS REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: