Keysight (Agilent) 70843B REPAIR and Keysight (Agilent) 70843B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 70843B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 70843B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our
 used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   Keysight (Agilent) 70843B   Description / Specification:    
Keysight (Agilent) 70843B Error Performance Analyzer

Agilent 70843B 12 Gb/s Error Performance Analyzer. Bit Rate: 100 Mb/s to 12 Gb/s . Rise Time (10% to 90%): less than 30 ps. Patterns: 2^7-1, 2^10-1, 2^15-1, 2^23-1, 2^31 -1; zero substitution; variable mark density; variable length user pattern from 1 bit to 8 Mbits. Data & Data Outputs: ECl or variable 0.5 V to 2 V peak-to-peak amplitude into 50 ohms. Sub-Rate Outputs: 4 data plus clock (1/4 of main data rate) 0.5 V to 1 V peak-to-peak amplitude. Jitter: < 20 ps peak-to-peak; <15 ps peak-to-peak at 10 Gb/s. Clock/data delay: 1 ns; resolution 1 ps (100-500 Mb/s) 1 clock period; resolution 1 ps (>500 Mb/s). Data Input Sensitivity: < 50 mV peak-to-peak (typical) at 10 Gb/s. Decision Threshold Range: + 1 V to -3 V; resolution 1 mV. Termination Voltage: Selectable 0 V or -2 V nominal. Errors Detected: Errored ones and zeros and all logic errors. Measurements: Error count, ratio; errored seconds, deciseconds, centiseconds, milliseconds; and G.821 analysis. Error Location Analysis: Bit BER, block BER. Options: UHF 12 Gb/s error performance analyzer (BERT), includes Pattern Generator and Error Detector. No display or clock source. UHG 12 Gb/s Pattern Generator, includes Pattern Generator only. No display or clock source. UHH 12 Gb/s Error Detector, includes Error Detector only. No display or clock source. UHJ Add error location analysis to option UHF or UHH. UKB extend lowest frequency to 0.1 Gb/s. UKC delete clock source from option UHF or UHG



 

Standard Calibration $795.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 70843B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Singlemode Fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.


Please contact us for your Keysight (Agilent) 70843B REPAIR and/or Keysight (Agilent) 70843B Error Performance Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: