|
|
Agilent 70843C 0.1-12.5 Gb/s Error Performance Analyzer. Bit Rate: 100 Mb/s to 12.5 Gb/s . Rise Time (10% to 90%): less than 30 ps. Patterns: 2^7-1, 2^10-1, 2^15-1, 2^23-1, 2^31 -1; zero substitution; variable mark density; variable length user pattern from 1 bit to 8 Mbits. Data & Data Outputs: ECl or variable 0.5 V to 2 V peak-to-peak amplitude into 50 ohms. Sub-Rate Outputs: 4 data plus clock (1/4 of main data rate) 0.5 V to 1 V peak-to-peak amplitude. Jitter: < 20 ps peak-to-peak; <15 ps peak-to-peak at 10 Gb/s. Clock/data delay: ±1 ns in 1 ps steps (100 MHz to 500 MHz) or 1 clock period(500 MHz to 12.5GHz). Resolution: ±1 ps. Data Input Sensitivity: < 50 mV peak-to-peak (typical) at 10 Gb/s. Decision Threshold Range: + 1 V to -3 V; resolution 1 mV. Termination Voltage: Selectable 0 V or -2 V nominal. Errors Detected: Errored ones and zeros and all logic errors. Measurements: Error count, ratio; errored seconds, deciseconds, centiseconds, milliseconds; and G.821 analysis. Error Location Analysis: Bit BER, block BER. Options: UHF 12.5 Gb/s error performance analyzer (BERT), includes Pattern Generator and Error Detector. No display or clock source. UHG 12.5 Gb/s Pattern Generator, includes Pattern Generator only. No display or clock source. UHH 12.5 Gb/s Error Detector, includes Error Detector only. No display or clock source. UHJ Add error location analysis to option UHF or UHH. UKB extend lowest frequency to 0.1 Gb/s. UKC delete clock source from option UHF or UHG
|