Keysight (Agilent) 71603B CALIBRATION and Keysight (Agilent) 71603B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 71603B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our  used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   Keysight (Agilent) 71603B   Description / Specification:    
Keysight (Agilent) 71603B Gigabit Error Performance Analyzer, MMS

The HP 71603B error performance analyzer consists of pattern generator, synthesized clock source, and error detector modules configured in the HP 70000 modular measurement system (MMS). The HP 71603B covers the range from 100 Mb/s to 3 Gb/s and features automatic clock/data alignment for rapid set-up of the error detector. The HP 71603B makes BER measurements on waveforms badly distorted by noise, jitter, and intersymbol interference through the high resolution setting of decision threshold and phase adjustment. Also features the simultaneous counting of errored ones and errored zeros to locate the source of pattern-dependent errors. Error distribut ion is analyzed by counting errored and errorfree intervals between one second and one millisecond. Bit Rate: 100 Mb/s to 3 Gb/s. Patterns and Data Outputs: As for pattern generators. Data Input: 0.5 V to 2 V p-p amplitude. Decision Threshold Range: + 1 to - 3 V, resolution 1 m V. Termination Voltage: Selectable 0 V or - 2 V nominal. Clock/Data Delay: ± 1 ns; resolution 1 ps. Errors Detected: Errored ones, zeros, and all logic errors. Measurements: Error count, ratio, errored seconds, deci-seconds, centi-seconds, milliseconds and G.821 analysis.



 

Standard Calibration $1,430.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 71603B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

PDH
Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Please contact us for your Keysight (Agilent) 71603B CALIBRATION and/or Keysight (Agilent) 71603B Gigabit Error Performance Analyzer, MMS REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: