Keysight (Agilent) 8167B REPAIR and Keysight (Agilent) 8167B CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8167B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8167B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our  used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   Keysight (Agilent) 8167B   Description / Specification:    
Keysight (Agilent) 8167B 1255 to 1365 nm Tunable Laser Source

The Agilent 8167B Tunable Laser Source addresses the 1300 nm transmission window. A built-in sidemode filter ensures that a true single-mode laser line is generated for every wavelength point, eliminating any possible multimoding. Independent control of the instrument parameters ensures that the output power is kept stable over time and wavelength. In manufacturing applications, the instrument can be integrated into a fully-automated production test environment for precise, fast and repeatable testing. In a manual setup, single or dual channel loss, return loss and coupling ratio measurements can be performed using the built-in application software. Specifications. Wavelength range: 1255 nm to 1365 nm. Absolute wavelength accuracy: ± 0.1 nm, typical. Relative wavelength accuracy: ± 0.035 nm, typical. Wavelength resolution: 0.001 nm. Wavelength stability: < ± 100 MHz. Wavelength repeatability: ± 0.035 nm, typical. Linewidth: 100 kHz, typical. Effective linewidth when broadened: 10 to 500 MHz, typical. Signal to source spontaneous emission ratio: > 35 dB/1 nm. Sidemode suppression ratio: > 40 dB, typical. Maximum output power: 3 dBm. Minimum output power: - 7 dBm (-47 dBm with option 003). Options. Opt 021: Straight Contact Output Connector. Opt 022: Angled Contact Output Connector. Opt 023: Angled Non-Contact Output Connector (Diamond HMS-10/HP/HRL). Opt 003: Built-in Variable Attenuator. Opt 007: Polarization Maintaining Fiber.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8167B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your Keysight (Agilent) 8167B REPAIR and/or Keysight (Agilent) 8167B 1255 to 1365 nm Tunable Laser Source CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: