Keysight (Agilent) 83404A CALIBRATION and Keysight (Agilent) 83404A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 83404A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our
 used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   Keysight (Agilent) 83404A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 83404A 840 nm Lightwave Source Module

The Agilent 83404A Lightwave Source Module is a laser diode source that is intended to be amplitude modulated for making frequency domain measurements of the modulation characteristics of lightwave componants. Specifications. Wavelength: 840 ± 20 nm. RMS Spectral Widths: = 1 nm. Average Power (typical): 2.0 mW/0.6 mW. Responsivity at 50 MHz (nominal): 0.063 W/A / 0.011 mW, -24 dB/-39 dB. Modulation Frequency Range: 300 kHz to 3 GHz. Modulation Frequency Response, Uncorrected: ±3.0 dB. Power Stability, per 1000 h: 0.6% typical. Center Wavelength Temperature Coefficient: 0.5 nm/° C typical. Maximum Laser Chip Temperature Change: ±0.1° C typical. Center Wavelength Stability at 25° C: < 0.3 %/year typical. Compatible Fiber: 50/125 um fiber, Average Power: 1.25 ± 0.75 mW. Can be modulated by an external signal up to +14 dBm (maximum)RF power. DC power input: -12.6V supply is > -15V; +15V supply is < +17V. Options. Opt 011, Diamond HMS-10. Opt 012, FC/PC. Opt 013, DIN 47256. Opt 014, ST.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 83404A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


Please contact us for your Keysight (Agilent) 83404A CALIBRATION and/or Keysight (Agilent) 83404A 840 nm Lightwave Source Module REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: