|
|
The HP 83650B Synthesized Swept-Signal Generator, combines excellent frequency resolution, level control, signal purity, and modulation capabilities you expect of a high-performance synthesized signal generator with the speed and convenience of a sweep oscillator. They are ideal for the demanding requirements of signal simulation, local oscillator, and stimulus/ response component or subsystem test applications. High-performance pulse modulators with >80 dB on/off ratio, and rise/ fall times < 10 ns (Option 006), make the HP 83650B suitable for the most demanding pulse modulation applications. In addition to its linear AM mode (100%/V), the HP 83650B offers a scan modulation mode (10 dB/V). Both modes have dc-coupled amplitude modulation capability with a 3 dB bandwidth of 100 kHz, and 99.7% (50 dB) of modulation depth. Pulse and amplitude modulation capabilities can be used independently and simultaneously. The HP 83650B also offers dc-coupled frequency modulation capabilities with rates up to 8 MHz. Specifications. Frequency Range: 10 MHz to 50 GHz. Resolution: 1 kHz (Option 008 1 Hz). Internal 10 MHz Time Base. Aging Rate: 5 x 10^-10/day, 1 x 10^-7/year. Output Power, Maximum Leveled: Output Frequencies <26.5 GHz +10 dBm, Output Frequencies >=26.5 GHz and <40 GHz +5 dBm, Output Frequencies >=40 GHz +2.5 dBm. Minimum Settable Output Power; Standard: -20 dBm, Option 001; -110 dBm. Resolution: 0.02 dB. Modulation; Pulse: On/Off Ratio 80 dB. Rise/Fall Times 25 ns. Minimum Width Internally Leveled 1 µs. AM and Scan; Bandwidth: (3 dB, 30% depth, modulation peaks 3 dB below maximum rated power): DC to 100 kHz. Modulation Depth: Normal Mode: –20 dBm to maximum available power. Options. Opt 001: Adds Step Attenuator. Opt 002: Adds Internal Modulation Generator. Opt 004: Rear-Panel RF Output. Opt 006: Fast-Pulse Modulation. Opt 008: 1 Hz Frequency Resolution. Opt 700: MATE System Compatibility.
Repair Services / Additional Information.
RF Connector Replacement
Damaged or broken connector (2.4mm) on your microwave signal source or spectrum analyzer? OEM won't sell the replacement to you? Custom-Cal has the solution. Want the connector moved from the from to rear on your signal source, this service is also the solution to undo the obsolete Model # -0041 (RF output connector moved to rear panel)
The input and output connectors on your microwave test equipment affects more than signal fidelity. A damaged connector will destroy expensive adapters and cables.
Whether your RF connector is worn out or was broken through mishandling or accident, Custom-Calibration Solutions will replace the OEM connector with a refurbished connector and new hard-line and bracket, as appropriate. The refurbished connector system will improve:
Signal fidelity (flatness or frequency response)
Input reflection (VSWR)
Output impedance match
Measurement repeatability
Ease of connection
Cable and adapter life
|