Keysight (Agilent) 8494H CALIBRATION and Keysight (Agilent) 8494H REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8494H Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Attenuator?
Shop for Comparable Products on our  used RF Attenuator page

 
   Keysight (Agilent) 8494H   Description / Specification:   Spec Sheet 
Keysight (Agilent) 8494H 18 GHz 11 dB Programmable Step Attenuator

The HP 8494H 18 GHz Programmable Step Attenuator offers fast, precise signal level control. It features exceptional repeatability and reliability in a wide range of frequency, attenuation and connector options. Attenuation repeatability is specified to be less than 0.03 dB for 5 million cycles per section. This assures low measurement uncertainty and high user confidence when designed into automatic test systems. Electromechanical step attenuators offer low SWR, low insertion loss and high accuracy required by high-performance test and measurement equipment. Specifications. Frequency Range: DC-18 GHz. Attenuation Range: 0-11 dB, 1dB steps. Maximum SWR: 1.5 to 8 GHz, 1.6 to 12.4 GHz, 1.9 to 18 GHz. Insertion Loss at 0 dB: 0.6 dB + 0.09 dB/GHz. Attenuation Accuracy dc to 12.4 GHz: ±0.3 dB (1 to 2 dB), ±0.4 dB (3 to 4 dB), ±0.5 dB (5 to 6 dB), ±0.6 dB (7 to 10 dB), ±0.7 dB (11 dB). Attenuation Accuracy dc to 18 GHz: ±0.7 dB (1 to 5 dB), ±0.8 dB (6 to 9 dB), ±0.9 dB (10 to 11 dB). Power Rating: 1 W average, 100 W peak 10 µs max. Minimum Life: 5 million cycles per section. Option 001 N(f). Option 002 SMA(f). Option 003 APC-7.



 

Standard Calibration $295.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8494H. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your Keysight (Agilent) 8494H CALIBRATION and/or Keysight (Agilent) 8494H 18 GHz 11 dB Programmable Step Attenuator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: