Keysight (Agilent) 86108A CALIBRATION and Keysight (Agilent) 86108A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86108A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Plug In?
Shop for Comparable Products on our  used Oscilloscope Plug In page

 
   Keysight (Agilent) 86108A   Description / Specification:    
Keysight (Agilent) 86108A Precision Waveform Analyzer Plug-in Module

The Agilent 86108A Precision Waveform Analyzer is a plug-in module used with the 86100C Infiniium DCA-J Digital Communications Analyzer that provides an ideal solution to this accuracy problem. The 86108A has a bandwidth in excess of 33 GHz, channel noise of less than 300 uV, and residual jitter at an astounding level of under 100 femtoseconds (60 fs typical). Bandwidth: 16 GHz and < 32 GHz, (35 GHz). Transition time (10% to 90% calculated from Tr = 0.35/BW): 10 ps. RMS noise (Characteristic): 240 uV (16 GHz) 420 uV (32 GHz). DC accuracy (single marker): ±0.7% of full scale, ±2 mV ±1.5% (16 GHz), (±3% 32 GHz) of (reading-channel offset). CW offset range (referenced from center of screen): ±500 mV. Input dynamic range (relative to channel offset): ±400 mV. Maximum input signal: ±2 V (+16 dBm). Refl ections (for 30 ps rise time): 5%. Clock Recovery; Data rates input range: Continuous tuning 0.05 to 13.5 Gb/s. Clock frequency input range: Continuous tuning 0.025 to 6.75 GHz. Minimum input level to aquire lock: 175 m Vpp. Minimum input level to aquire lock and achieve jitter specifications: 125 m Vpp. Clock recovery adjustable loop bandwidth range (user selectable): 0.015 to 10 MHz. Loop bandwidth accuracy: ±30%. Aquisition range: ±5000 ppm. Residual spread spectrum: -72 ±3 dB @ 33 kHz. Internal frequency counter accuracy: ±10 ppm.



 

Standard Calibration $1,390.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86108A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) 86108A CALIBRATION and/or Keysight (Agilent) 86108A Precision Waveform Analyzer Plug-in Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: