Keysight (Agilent) 8662A REPAIR and Keysight (Agilent) 8662A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8662A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8662A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   Keysight (Agilent) 8662A   Description / Specification:    
Keysight (Agilent) 8662A 1280 MHz Synthesized Signal Generator

The HP 8662A derives exceptional RF performance from an indirect frequency synthesis technique that results in frequency resolution of 0.1 Hz from 10kHz to 640 MHz and 0.2 Hz from 640 MHz to 1280 MHz. Output level accuracy is held to ± 1 dB using microprocessor correction. This makes the HP 8662A an ideal generator for performing precise receiver sensitivity tests either manually or in automated systems. The HP 8662A offers versatile phase-locked AM/FM using either internal 400 Hz and I kHz rates or externally applied modulating signals, which can be either dc or ac coupled. Several different modes of simultaneous modulation (such as AM + FM or FM + FM) are possible. Fast frequency switching combined with microprocessor control gives the HP 8662A a powerful sweep capability. Automatic, single, and manual modes are available for both linear and logarithmic sweeps with user-selectable step size and number of steps. Specifications. Frequency Range: 10 kHz to 1280 MHz (1279.9999998 MHz).. Frequency resolution of 0.1Hz from 10kHz to 640MHz and 0.2Hz from 640MHz to 1280MHz. Output is available from +13 to -139.9 dBm with output level accuracy held to ±1 dB using microprocessor correction. Versatile phase-locked AM/FM using either internal 400Hz and 1kHz rates or externally applied modulating signals, which can be either DC or AC coupled. <420 microsecond frequency switching speed, <-144 dBc/Hz SSB phase noise at 10 kHz offset. Opt 001 RF connectors on rear panel only, Opt 003 Specified SSB phase noise for 640 MHz output.



 

Standard Calibration $650.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8662A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity


Please contact us for your Keysight (Agilent) 8662A REPAIR and/or Keysight (Agilent) 8662A 1280 MHz Synthesized Signal Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: