Keysight (Agilent) 8712B CALIBRATION and Keysight (Agilent) 8712B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8712B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8712B   Description / Specification:    
Keysight (Agilent) 8712B 1.3 GHz RF Economy Network Analyzer

HP 8712B, RF Economy Network Analyzer offers high performance RF vector measurement capabilities, including phase, complex impedance, and linear group delay.. Frequency Range: 300 kHz to 1300 MHz. Resolution: 1 Hz. Accuracy: < 5 ppm. Output Power Range (standard): <1000 MHz, 0 to 16 dBm; >1000 MHz, 0 to 13 dBm (75 ohm reduces output by 3 dB). Power Range With Attenuator: <1000 MHz, -60 to 13 dBm; >1000 MHz, -60 to 10 dBm (75 ohm reduces output by 3 dB). Test Port Accuracy and Flatness: Standard ±1.0 dB, Opt 1EC ±1.5 dB, Opt 1E1 ±2.0 dB, Opt 1EC and Opt 1E1 ±3.0 dB. Signal Purity Harmonics (at +7 dBm): < 1 MHz < - 20 dBc, > 1 MHz < - 30 dBc. Receiver Frequency Range: Narrowband, 300 kHz to 1300 MHz; Broadband, 10 MHz to 1300 MHz. Dynamic Range Narrowband: <5 MHz, >60 dB; >5 MHz, >100 dB. Dynamic Range Broadband: Internal, >66 dB; External, >66 dB. Maximum Input Narrowband: 10 dBm, 0.8 dBm compression. Maximum Input Broadband: 16 dBm, 0.5 dBm compression. Reflection Port Match: 20 dB. Transmission Port Match: 18 dB typical. System Directivity: 40 dB. Sweep speed (50 ms/sweep)



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8712B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your Keysight (Agilent) 8712B CALIBRATION and/or Keysight (Agilent) 8712B 1.3 GHz RF Economy Network Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: