Keysight (Agilent) 8719ET REPAIR and Keysight (Agilent) 8719ET CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8719ET. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8719ET Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8719ET   Description / Specification:    
Keysight (Agilent) 8719ET Transmission/reflection Vector Network Analyzer

Agilent 8719ET, 50 MHz to 13.5 GHz, Transmission/reflection vector network analyzer. Frequency Accuracy (at 23° C ±3° C): ±10 ppm. Frequency Stability 0° to 55° C: ±7.5 ppm, Option 1D5 ±0.05 ppm. Frequency Resolution: 1 Hz. System Maximum input level: +5 dBm transmission, +10 dBm reflection. System Trace noise, Magnitude (RMS of peak-to-peak value): 0.05 to 13.5 GHz <0.03 dB, 13.5 to 20 GHz <0.04 dB, 20 to 40 GHz <0.15 dB. System Trace noise, Phase (RMS of peak-to-peak value): 0.05 to 13.5 GHz <0.3°, 13.5 to 20 GHz <0.4°, 20 to 40 GHz <1.5°. Spectral purity, Harmonics at maximum output level: <–15 dBc. Spectral purity, Phase noise: to 60 kHz from carrier at 2 GHz <–55 dBc, to 60 kHz from carrier at 20 GHz <–35 dBc. Spectral purity, Nonharmonic spurious signals: at 100 kHz offset <–40 dBc, at 200 kHz offset <–45 dBc, at >200 kHz offset <–65 dBc. Power range: 20 dB. Resolution Level accuracy (at 5 dB below maximum output power): ±2 dB. Power sweep range: 20 dB (30 dB typical). Power linearity: –5 dB from reference, ±0.35; +5 dB from reference, ±0.35; –10 dB from reference, ±0.60; +10 dB from reference, ±1.0. System Dynamic range (standard, Options 004): 0.05 to 0.84 GHz, 102 dB; 0.84 to 20 GHz, 104 dB. Measured number of points per sweep: Linear frequency: choose 3, 11, 21, 51, 101, 201, 401, 801, or 1601 points. GPIB interface



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8719ET. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your Keysight (Agilent) 8719ET REPAIR and/or Keysight (Agilent) 8719ET Transmission/reflection Vector Network Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: