Keysight (Agilent) 8753B REPAIR and Keysight (Agilent) 8753B CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8753B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8753B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8753B   Description / Specification:    
Keysight (Agilent) 8753B 3 GHz RF Network Analyzer

The HP 8753B RF Network Analyzer provides excellent RF network measurements for the lab and production test areas. When combined with a test set, it yields a complete solution for characterizing the linear behavior of either active or passive networks, devices, or components from 300 kHz to 6 GHz. With two independent display channels available, you can simultaneously measure and display the reflection and transmission characteristics of the device under test in overlay or split screen format. The easy-to-use softkey selection of measurement functions allows you to measure the magnitude, phase, or group delay characteristics of your device under test. The HP 8753B's integrated synthesized source provides > 100 mW of output power, 1 Hz frequency resolution, and linear, log, list, power, and CW sweep types. Three tuned, 300 kHz to 3 GHz (Option 006 extends to 6 G Hz) receivers allow versatile independent power measurements or simultaneous ratio measurements over a 100 dB dynamic range. By employing the HP 85047A Test Set with the HP 8753B, the reflection and transmission characteristics of the device under test can be investigated from 300 kHz to 3 GHz or from 3 MHz to 6 GHz with the test set's frequency doubler enabled. Specifications. Source Frequency Range: 300 kHz to 3 Ghz. Source Frequency Resolution: 1 Hz. Source Frequency Accuracy (25 C): ± 10 ppm. Power Range: - 5 to +20 dBm. Power Accuracy (50 MHz, + 10 dBm): ± 0.5 dB. Impedance: 50 ohms. Receiver Frequency Range: 300 kHz to 6 GHz. Receiver Inputs: A, B 100 dB dynamic range < 3 G Hz, 95 dB dynamic range 3 to 6 GHz. Receiver Sensitivity (noise level): 3 kHz BW: - 90 dBm <3 GHz, -85 dBm 3 to 6 GHz; 10 Hz BW: - 100 dBm <3 GHz, - 95 dBm 3 to 6 GHz. Maximum Input Level: 0 dBm. Impedance: 50 ohm. Option 002, Harmonic Measurement Capability. Option 006, 6 GHz Receiver Option. Option 010, Time Domain Capability.



 

Standard Calibration $780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8753B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your Keysight (Agilent) 8753B REPAIR and/or Keysight (Agilent) 8753B 3 GHz RF Network Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: