Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8753D. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8753D Calibration, onsite calibration may be available.
We specialize in quick turnaround times and we can handle expedited deliveries upon request.
Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
used Network Analyzer, SNA, VNA page
or
new Network Analyzer, SNA, VNA page
More
|
|
|
The HP 8753D RF network analyzer provides affordable excellence in RF network measurement for laboratory and production testing. It has an integrated S-parameter test set for longer-lasting calibrations. The Agilent 8753D gives you a complete solution for characterizing active or passive networks, devices, or components from 30 kHz to 6 GHz. An integrated, synthesized source provides > 100 mW of output power, 1 Hz frequency resolution, and linear, log, list, power, and CW sweep types. Three tuned receivers allow independent power measurements or simultaneous ratio measurements over a wide dynamic range of 105 dB at 6 GHz (with Option 006 frequency extension) or 110 dB at 3 GHz (standard). The integrated test set allows you to measure transmission and reflection characteristics of a device to 6 GHz without a frequency doubler. Specifications. Test Port Output. Frequency Characteristics Range: 30 kHz to 3 GHz (std.); 30 kHz to 6 GHz (Option 006); 300 kHz to 3 GHz (Option 011); 30 kHz to 6 GHz (Option 011, 006). Resolution: 1 Hz. Accuracy: ±10 ppm at 25°C± 5° C. Output Characteristics. Power range: –85 to 10 dBm. Resolution: 0.05 dB. Sweep Range: 25 dB. Level Accuracy: ±1.0 dB relative to 0 dBm output level. Level Linearity: (–15 to +5 dBm) ±0.2 dB typical 30 kHz to 300 kHz; (+5 to +10 dBm) ±0.5 dB typical 30 kHz to 300 kHz. Test Port Input Characteristics. Frequency Range: 30 kHz to 3 GHz (std.); 30 kHz to 6 GHz (Option 006). Average Noise Level 3 kHz BW: –82 dBm (< –3 GHz), –77 dBm (3 to 6 GHz). Average Noise Level 10 Hz BW: –102 dBm (< –3 GHz), –97 dBm (3 to 6 GHz). Maximum Input Level: +10 dBm. Damage Level: +26 dBm or 35 Vdc. Options. Opt 002, Harmonic Measurement Capability. Opt 006 6 GHz Frequency Extension. Opt 010 Time-Domain Capability. Opt 011 Delete Built-in Test Set. Opt 075 75 ohm Impedance. Opt 1D5 High-Stability Frequency Reference.
|