|
|
The Agilent E3616A Single-output CV/CC DC power supply can be used as either a voltage source or current source. The CC-set button allows you to quickly set the current limit when operating in the CV mode, without shorting the output. 10-turn controls allow accurate adjustment of voltage and current output settings. The output voltage and current can also be controlled with external 0 to 10 volt analog signals or variable resistance. Output connections can be made on either the front or rear panel. Remote sensing is available to eliminate the errors in voltage regulation due to voltage drops in the load leads. Either the positive or negative output terminal may be connected to ground to provide positive or negative output voltage. Either terminal can also be floated to a maximum of 240 volts. Multiple units can be combined in auto-parallel, autoseries and auto-tracking configurations to obtain more voltage or current output. The load is protected with the over-voltage protection feature, which is easily monitored and adjusted from the front panel. The digital voltage and current meters provide continuous and accurate readings of the output levels. Output Range: 0 to 35 V, 0 to 1.7 A (60 W). Load and line regulation: 0.01% +2 mV. Ripple and noise: rms 200 µV, peak-to-peak 1 mV. Resolution Voltage: 10 mV (0-20 V), 100 mV (20 V). Resolution Current: 1 mA.
|