A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E8358A Calibration, onsite calibration may be available.
We specialize in quick turnaround times and we can handle expedited deliveries upon request.
Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
used Network Analyzer, SNA, VNA page
or
new Network Analyzer, SNA, VNA page
More
|
|
|
The Agilent E8358A 9 GHz PNA vector network analyzer offers unparalleled measurement capabilities. Using the widest bandwidth and 1601 points, you get measurements at 35 µs/point. This speed does not come at the expense of trace noise. The 35 kHz IF bandwidth boasts an impressively low trace noise of 0.004 dB RMS. The result is very accurate measurements of low-loss devices. With direct access to measurement receivers, you can measure up to 143 dB of dynamic range. This increased measurement range enables clear, precise measurements of base station filters or LNA receiver/filter combinations. The PNA E8356A provides additional accuracy through TRL/TRM calibration. The series uses four mixer-based receivers so you can utilize true TRL/TRM calibration for accurate in-fixture and onwafer measurements. The time-domain option (Option 010) allows you to locate and resolve discontinuities in devices, fixtures, or cables. Once located, unwanted responses can be removed using the gating function. Option 010 also furnishes a very simple and deterministic technique to tune cavity-resonator filters. Option 015 provides a configurable test set for maximum flexibility. Front panel access to the RF signal path allows for customization within the test set. Specifications. Frequency Range: 300 kHz to 9 GHz. Impedance: 50 ohms. Test Port Connector: Type-N (female). Frequency Resolution: 1 Hz. Trace Noise 1 kHz IF BW (Magnitude / Phase): <0.002 dB rms / < 0.010° rms. Trace Noise 10 kHz IF BW (Magnitude / Phase): <0.005 dB rms / < 0.035° rms. Source Power Range: –85 to +10 dBm (300 kHz to 6 GHz), –85 to +5 dBm (6 GHz to 9 GHz). Power Resolution: 0.05 dB. Power Level Linearity: ±0.3 dB. Power Sweep Range: 25 dB (300 kHz to 6 GHz), 20 dBm (6 GHz to 9 GHz).. System Dynamic Range At test port: 125 db (300 kHz to 25 MHz), 128 db (25 MHz to 3 GHz), 118 db (3 GHz to 6 GHz), 113 db (6 GHz to 9 GHz). Options. Opt 010, Time Domain. Opt 015, Configurable Test Set. Opt AM8, Add CD R/W Drive. Opt B30, Add USB Hub.
|