|
|
The Agilent E9300A E- Series power sensor is a true average, wide dynamic range RF microwave power sensor. It is based on a dual sensor diode pair/attenuator/diode pair proposed by Szente et. al. in 1990. This technique ensures the diodes in the selected signal path are kept in their square law region, thus the output current (and voltage) is proportional to the input power. This sensor measures average RF power on a wide variety of modulated signals and are independent of the modulation bandwidth. It is ideally suited to the average power measurement of multi- tone and spread spectrum signals such as CDMA, W- CDMA and digital television formats. The Agilent E9300A power sensor is NOT compatible with the earlier Agilent 430- Series, Agilent E1416A, or Agilent 70100A power meters. It is compatible ONLY with the Agilent EPM series power meters. Also, not all Agilent EPM series power meters are immediately compatible - your power meter must use firmware and Digital Signal Processing (DSP) code from a specific release onwards.
Specifications.
Frequency Range: 10 MHz to 18.0 GHz.
Connector Type: Type - N (Male) 50 ohm.
Maximum SWR (25 °C ± 10 °C):
1.15 (10 MHz to 30 MHz),
1.13 (30 MHz to 2 GHz),
1.13 (2 GHz to 14 GHz),
1.22 (14 GHz to 16 GHz),
1.26 (16 GHz to 18 GHz).
Maximum Power: +25 dBm (320 mW) average, +33 dBm peak (2 W) <10 µs.
|